1. Thermostat and control panel
2. Ice cube tray and ice bank
3. Fast freeze compartments
4. Storage drawers
Page 3
Parts identification
The parts are listed and numbered below to help
identification.
FIGURE 1
1
3
4
2
4
4
4
Important
Make sure that the voltage marked on the rating label on the product corresponds with the voltage in your
home.
This quality product has been tested and certified to meet all applicable UK electrical and safety standards.
Installation and controls
FIGURE 2
SPACER
CONDENSER
The appliance is designed to work in room
temperatures b16°C and +32°C. Do not
allow the room temperature to 32°C
otherwise the temperature inside the freezer will
rise.
Fit the spacers onto the condenser tubes (Figure 2)
The freezer requires space around the casing for
efficient cooling and operation. The minimum
clearances are shown in Figure 3.
The freezer must be installed on a firm flat and
level surface for it to work quietly and efficiently.
Indicator lights
The indicator lights are on the front of the freezer
above the door. When they illuminate they indicate:
Yellow light
Fast freeze on
Green light
Power on
Red light
Temperature warning light
FIGURE 3
Diagrams show alternative methods of providing correct air flow
around the appliance.
100 mm
25 mm
25 mm
100 mm
