4
5
OPERATION
Turning ON/OFF
Press the power ‘ON’ button to turn
on and ‘OFF’ button to turn off the
evaporative cooler.
Setting Fan SPEED
Press the speed button to set fan
speed. Press the button repeatedly to
change the fan speed – Low, Medium
and High
Setting the Mode
Change the mode to the desired type
(Normal, Breeze and Circulate) by
pressing the mode switch repeatedly.
Modes Explained
1. Normal mode – The fan speed
remains constant at set speed (Low
or Medium or High). This mode is
recommended normal operation.
2. Breeze mode – The fan speed varies
randomly (Low, Medium, High and off)
giving the effect of natural breeze. It is
recommended to set the fan speed at
high under this mode for better result.
3. Circulate (sleep) mode – The fan
speed switches on and off at set
speeds thus saving energy during
night. It is recommended to set the
fan speed at low under this mode for
quieter performance and less energy
consumption.
* Please make sure sufficient
water is in the storage tank before
operation.
Refer to Storage & Drainage section for
details.
Cool Function
Cool switch is used to operate the
automated water pump system. This
function is recommended for higher/
efficient cooling effect under any
mode.
Oscillate Function
(Regulating air flow direction)
Oscillate function switch is used to
direct the air flow automatically from
horizontally (side to side) by means of
the vertical louvers. This can be done
while the unit is in operation.
To control the air flow direction via
the horizontal louvers adjust louvers
manually (louvers interlocked).
Setting Timer
Set the Timer to the desired operating
time (0.5 Hour to 7.5 Hours) by
pressing the Timer switch repeatedly.
When the set time has been reached
the unit will shut off automatically.
CWEC01 Instructions copy.indd 4
15/07/10 2:02 PM
