Cooluli VIBE-15LE, Инструкция по эксплуатации

Страница: 5 / 12

Before plugging in the cooler/warmer unit:
make sure the switch on the back of the unit is set to
the OFF setting.
A minimum 2” vent clearance is required for proper ventilation.
Plugging in your unit:
Turning on your unit:
1.
2.
3.
4.
Fig. 4
Fig. 5
Vents
COLD/WARM SWITCH
AC/DC SWITCH
DC PORT
AC PORT
For home application: use the supplied AC Power Cord (see Fig. 2) by inserting AC
connector into unit’s AC port (see Fig.4) and inserting AC plug into wall outlet. This unit
ONLY works on 100-120V (in compliance with North American standards). Unit will sustain
damage and warranty will be void if unit is plugged into a 220-230 volt outlet.
For motor vehicle application:
Car engine MUST be turned on first before plugging in the
cooler/warmer. This precaution prevents a power surge that can lead to the unit
overheating and/or becoming a potential fire risk. Use the supplied DC Power Cord (see
Fig. 3) and insert DC connector into unit’s DC port (see Fig.4) and the DC plug into the
appropriate cigarette-lighter outlet.
For Cooling: Set the power switch to the COLD setting. A green light will turn on to
indicate that the unit is in cooling mode.
For Warming: Set the power switch to the WARM setting. A red light will turn on to
indicate that the unit is in warming mode.