Coolster CHALLENGER GK-6125A 2018, Руководство пользователя, Страница: 19 / 45

P17
OPERATION AND RIDING RULES
Cold Start and engine preheating
Note: This vehicle only uses the brake motor starter switch to
start. Squeeze the engine brake handle on to start. Make sure the
choke is on before a�emp�ng to start.
1. Turn igni�on switch to the "•" posi�on.
2. Turn the fuel valve to “on” posi�on.
3. Step on the rear brake pedal and hold (to prevent vehicle
from launching forward).
4. Make sure the upward resistance thro�le arm is closed.
5. Press the start switch.
6. Release the thro�le and allow engine to idle. Lightly tap the
accelerator to rev engine to sustain combus�on if needed.
Note: If the engine can not start, release the star�ng switch,
wait a few seconds, then try again. Try each a�empt with at least
30 seconds apart from each other in order to protect the ba�ery.
The starter should not be forced for more than 5 seconds when
a�emp�ng igni�on.
Note: In order to achieve maximum engine life, ensure the
engine is preheated before riding. Cold-engine accelera�on is not
recommended.