background image

P24

P25

If this vehicle just with 1 forward gear and 1 reverse gear,please 

do as follows 

1.if  you  want  to  move  forward  ,just  take  the  gear  shift  lever 

forward with a gear.

2.open the accelerator slowly.

3.if you want to go backward ,please take the gear shift lever 

back to neutral first ,then go backward to reverse gear.

4.open the accelerator slowly.
If this vehicle with 3 forward gears and 1 reverse gear,please do 

as follows

1.if  you  want  to  move  forward  ,just  take  the  gear  shift  lever 

forward with a gear.

2.open the accelerator slowly.

3.When  to  enter  premier  gear,you  need  to  close    throttle 

valve,then put forward 1 gear after clutch apart

4.Repeat process above,you can enter superior gears

5.if you want to go backward ,please take the gear shift lever 

back to neutral first ,then go backward to reverse gear.

6.open the accelerator slowly.

Shift and acceleration of engine

Because the cars use Automatic Clutch body

. So acceleration 

and deceleration size only need to control the throttle on the up. 

According to the former right hand thumb of increased speed, 

deceleration is loosened. 

The acceleration engine

Note: Don’t shift when you are riding ,in order to 

prevent the risks.We must disengage the clutch 

first when you want to shift.

The commissioning Engine 

   0-1000 km from the motorcycle mileage during your life is very 

important for the period. Because the engine is new and in the 

meantime we must avoid prolonged Full Throttle or any situation 

that could be the super-engine overheating. 

    1,0  150 km: 

      Operation and avoid prolonged refueling over 1 / 4 throttle 

position. An hour after the operation should cease engine to cool 

5 to 10 minutes. 

    2,150  500 km: 

        Operation to avoid refueling over 1 / 2 throttle position. At 

any  time,  should  not  be  used  Full  Throttle  operation  of  this 

vehicle. 

    3,500  1000 km: 

        To avoid refueling over 3 / 4 throttle position. 

    4,1000 km long and more: 

    Full  throttle  operation  should  be  avoided.  Avoid 

ultra-high-speed engine work. 

Note: When traveling to the 300 km  500km, the oil must be 

replaced. 

As the car had not been installed Odometer to estimate mileage 

can only be calculated

Parking

When the car to stop, they should stop and pull out 

the engine ignition key. 

the fuel valve turn to:“see right  picture”position.(If there is oil 

switch,please click it.)

Warning: 

●  because  after  running  and  the  exhaust  muffler  very  hot, 

vehicles should be parked in child care and others not likely to 

encounter places.

Содержание ATV-3125A

























Отзывы: