
To detach the hose connectors from the main base, turn the connectors clockwise until it stops
and then pull it away.
To assemble the hose connector to the main base, reverse the steps to finish the assembly.
Assembling Dome Cover to Main Base
NOTE: Start this assembly after finishing all hose connections.
There are 4 tabs on dome cover and 4 slots on the solar heater base. Push the tab into the slot to
secure the dome cover on the heater base.
CAUTION
:
Don’t hold the dome cover to move the whole unit.
Connecting the
CoolSplash
Solar Heater to the pool
CAUTION
:
Before beginning to connect this solar heater to your pool, make sure
your pool water outlet and return inlet are closed and already connected with hoses.
Refer to your pool manual or consult your pool dealer for proper instructions.
CAUTION
:
Turn off the pump before following installation
1) For pools using hose connection of Dia. 32mm (1 1/4in) / 38mm (1 1/2in)
Soft Hose
a) Detach the pool return hose from your pump/filter
.
b) For soft hose of Ø32mm (1 1/4in), directly slide the hose to the hose connectors
as far it can go. Use the hose clamp to secure the hose connection.
26
Содержание Solar Heater
Страница 31: ...Trouble Shooting 31...
Страница 32: ...Exploded Drawing 32...