7
15. Secure roof panels into place using the
plastic caps and bolts provided. Insert
aluminium extrusion into place on the
top ridge. (Refer Fig. 11 & 12).
NOTE
:
Alternatively, secure one roof
panel, then attach aluminium extrusion
to it before securing second roof panel,
if this is easier.
Your assembled dog house should look
like Fig. 13.
16. Finally, affix dog bowl into position.
(Refer Fig. 14)
You are now ready to test the water
cooling feature.
WARNING:
Strong water pressure will damage the
cooling block – Please allow time for
the water to pass through the kennel
slowly – It should take approximately
5 minutes before the water starts to flow
into the water bowl via the downpipe.
Fig. 11
Fig. 12
Fig. 14
IMPORTANT:
Correct Water Pressure
Fig. 13