HT66 Luminaire with Fixed Plant Bracket
420mm
280mm
22mm
Ø17mm
85.5mm
136mm
34mm
34mm
45mm
20mm
MOUNTING BRACKET INSTALLATION
Mount light fitting to appropriate location.
(Tighten the M16 screws properly - not supplied)
Step 1
To adjust the mounting angle, unscrew M10 x 30 bolt
(with spring and washers) and loosen M16x40 bolt.
Adjust the angle of the fixture and once done, tighten the screws
until the fixture is fully locked in the desired position.
Step 3
Use Loctite® 243™
retaining compound
(not included)
to secure the bolt.
Page 1 / 2
aus.
1300 287 533 •
intl.
+613 8681 3633 • www.coolon.com.au
Product must be installed by a suitably qualified person. All documentation is subject to change without notice. Refer to our website for the latest information.
www.coolon.com.au
Page 1 / 2
HT66 INDUSTRIAL LED LUMINAIRE
MANUAL
EDITION 2.0
380mm
HT66-470. Remote Power Supply
*Cable glands not supplied
HT66-320. Remote Power Supply
*Cable glands not supplied
269mm
324.5mm
M25x1.5
2x M25x1.5
2x M12x1.5
13mm
9.5mm
M20x1.5
2x M20x1.5
115mm
204mm
101mm
75mm 144mm
221mm
382mm
355mm
Step 2
Technical Specification
HT66-470-RPS230
HT66-470-RPS415
HT66-320-RPS
POWER
470W Max (including power supply)
470W Max (including power supply)
320W Max (including power supply)
VOLTAGE
100 – 240VAC 50/60Hz 127 – 250VDC
277 – 440VAC 50/60Hz 352 – 500VDC
200 – 440VAC 50/60Hz 254 – 550VDC
IP/IK RATING
IP66 / IK09
IP66 / IK09
IP66 / IK09
OPERATING TEMP.
-20 to +50°C
-20 to +50°C
-20 to +50°C
