1. Function Description
This power supply is designed for personal computer. There are eight DC
o5V,+12V1,+12V2,+12V3,+12V4,-12V,+3.3V&+5V
SB
and it provides
power to all computer systems and peripherals with maximum protection.
Here are some of the key features:
It is rather simple to install this power supply to your precious computer
tower. Follow the steps below to finish the setup.
Step1:Open the computer tower cover; put the power supply into the
corresponding location of the tower, and then use right screws to fix the
power supply to tower.
Step2:Put the Main Power Connector, ATX12V Connector, S-ATA Connector,
dual PCI express power connector, Peripheral Connectors and Floppy
Connectors to the corresponding male connectors of main-board,
peripheral devices(i.e. HDD, CDROM etc.) and floppy drivers
respectively. When you connect connectors, please pay attention to the
orientation of them because of the different hole sizes. Find the proper
orientation and push down firmly making sure that the pins are aligned.
2. How to Setup
1
Tube-tide design to tidy wires
Anti-corrosive nickel plated chassis
Active Power Factor Correction
Fully supports all Intel&AMD system demands
All kinds of protection circuits(OCP/OVP/SCP/OPP)
S-ATA ready
3. Specifications
3.1 Input Requirements
115V(100Vmin.-120Vmax.), 60Hz
230V(200Vmin.-240Vmax.), 50Hz
The power supply shall operate as below:
High efficiency : not less than 75% at full load