CoolGear USBG-7DU2i, Руководство по установке

Страница: 1 / 3

Sales@coolgear.com www.CoolGear.com
CoolGear 7-Port USB 2.0 Metal Hub - DIN RAIL Mount Kit NEC Chip – Installation Guide
1. Introduction: USBG-7DU2i
The High-Speed 7-port USB 2.0 hub provides an ideal solution to expand 7 USB 2.0 ports from one single USB 2.0 host
port. It provides a self power source (+7~24VDC from 2-pin Terminal Blocks) to provide enough power on USB 2.0 buses.
FEATURES:
•
Compliant with USB Specification Revision 2.0
•
Rigid and Wall-mountable Metal Case
•
Supports High-speed and or Full-speed Packet
•
Protocol Sequencer for Endpoint 0/1
•
Provides 7 Downstream Facing Ports
•
Supports 480Mbps, 12Mbps and 1.5Mbps Speed
•
Supports Self-powered and Bus-powered Mode
•
Supports USB Screw Lock Mechanism
2. Connector Layout
• Upstream Port Connector: Type-B connector from upstream USB 2.0 port. It is connected from host or another
USB 2.0 hub.
• Self Power Input Connectors: This 2-pin (one pin plus voltage and the other pin is ground) terminal block
connectors are used to connect strong power to self-power the hub, the voltage can be in the range from +7V to
24VDC.
Warning!!
Please make sure the polarity of the input power should be correctly match the terminal block pins, otherwise it will
damage the hub.
Power LED
Self Power Input
Connectors
Upstream Port
Connector
7 Downstream Ports