6 USBG-4U2ML – Product Manual
www.coolgear.com
1.3
Hardware Installation
1.
Use static electricity discharge precautions
. Remove possible static
discharge potential from any objects that the hub may come in contact with
before installation. This can be accomplished by touching a bare metal
chassis rail after you have turned off the power.
2.
Attach the AC Power Adapter
.
3.
Connecting USB Host cable:
The host cable is a standard A-to-B USB2.0 cable
(or optional Screw-Lock type cables). Please connect the type-A end
connector of the cable to your upstream USB port, then connect the type-B
end connector to this hub. Since the USB hub is plug-and-play, you don’t
have to turn off your host computer when installing the hub.
4.
Connect the USB devices to the downstream ports of this hub. You can use
either non-Screw-Lock or Screw-Lock type (optional) cables.
5.
Mount your hub on the wall if required.
1.4
Checking the Hub Installation
To check the USB hub installation in Windows device manager, please follow the
following steps:
1.
Click
Start
2.
Click
Control Panel
3.
Click
System
4.
Click
Device Manager
button
5.
Double Click
Universal
Serial Bus Controller
6.
Double click
Generic
USB Hub
, the
message will show
that this device is
working properly
Figure 3
