USB-8COMi-RM – Product Manual
17
www.coolgear.com
7.
Notes, Tips, and Warnings
Note
Note:
You need to install driver first, prior to hardware installation. After the
setting of DIP switches and connecting power cord to the adapter, you then
plug the adapter to USB port to start driver installation.
Note:
Sometimes, when operating in RS-422 or RS-485, it is necessary to
configure termination and biasing of the data transmission lines. Generally
this must be done in the cabling, since this depends on the installation of
connections. Before applying the option, check your cable specification for
proper impedance matching. Reference section 2.
Note:
You need to install driver first, prior to hardware installation. Do not
connect the USB-to-Serial Adapter to the USB port of your computer, before
you finish driver installation.
Note:
if you have more than one USB Serial Converter installed in your PC,
you need to repeat step 7 and step 8 to delete the driver software for all
Tip
N/A
Warning
N/A
Safety
•
Read the entire Product Manual before implementing this product for
your application. This manual contains important information about
electrical connections that must be followed for safe and proper
operation.
•
Inspect the product closely for visual defects before putting it to use.
•
Keep away from areas where moisture builds, this product contains
electrical components that can be damaged by moisture build up, this
can adversely affect your equipment connected to it.
•
Do not disassemble the product. Handling the product’s internal
components can expose it to ESD (Electro-Static Discharge) hazards
that can affect the function of the device.
