4-Port Managed USB3.2 Gen 1 Metal Hub with DIN RAIL Mounting Kit
4
3.
Connecting USB Host cable:
The host cable can be a standard B-to-
A or B-to-C USB3.2 Gen 1 cable
(depends on the host port’s connector
type). Please connect the type-A (or Type-C) end connector of the
cable to your USB host port, then connect the type-B end connector
to this hub. Since the USB hub is plug-and-
play, you don’t have to turn
off your host computer when installing the hub.
4.
Connect the USB devices to the downstream ports of this hub.
5.
Mount your hub on the wall or DIN RAIL if required.
6.
Install the USB Hub Administrator Utilities as described in the
following chapter
DIN RAIL Clip
Wall mounting holes
