4
ENGLISH
FAN CF-2043
The fan is intended for artificial ventilation of the room.
DESCRIPTION
1. Control panel
2. Front panel (with an air outlet)
3. Rear panel (with an air inlet grid)
4. Base
5. Power cord
6. Fixator locks
7. Remote control socket
8. Stand footing groove
9. Connector clamps
10. Clamping nut
11. Power cord duct
12. Display
Control panel (1)
13. Air flow mode selection button
14. Timer setting button
15. On/off button
16. Speed mode button
17. Oscillation mode button
18. Remote control
SAFETY PRECAUTIONS
Before using the fan, read this instruction manual carefully and
keep it for further reference.
•
Use the unit for its intended purpose only as specified in
this manual.
•
Mishandling the unit can lead to its breakage and cause
harm to the user or damage to his/her property.
•
Before switching the unit on for the first time make sure that
your home mains voltage corresponds to the unit operat-
ing voltage.
•
Before using the fan examine the power cord closely and
make sure that it is not damaged. If you find that the power
cord is damaged, do not use the unit.
•
Do not use the fan outdoors.
•
Place the unit on a flat, dry and steady surface away from
sources of heat or open flame.
•
Do not use the unit near containers filled with water, next to
a kitchen sink, in wet basements or near a swimming pool.
•
Do not immerse the fan, power cord and power plug into
water or any other liquids.
•
Do not touch the unit body and the power plug with wet
hands.
•
If the fan falls into water, unplug it before touching it and
only then you may take the fan out of water. Apply to the
nearest authorized service center for testing or repairing
the unit at the contact addresses given in the warranty cer-
tificate and on the website www.coolfort.ru.
•
Make sure that the power cord does not contact with hot
surfaces and sharp furniture edges.
•
Do not switch the unassembled fan on.
•
Do not insert any foreign objects into the openings of the
fan protective grids to avoid injuries or unit damage.
•
Do not touch the rotating blades during the fan operation.
•
Do not place the fan near curtains or house plants.
•
It is not recommended to stay under the air flow coming
from the fan for a long time (especially for children and
elderly people).
•
Never leave the operating unit unattended.
•
Unplug the fan before cleaning and when you do not use the
unit or before moving it to a new place.
•
When unplugging the fan pull the plug but not the cord.
•
Clean the unit regularly.
•
Do not leave children unattended to avoid them using the
unit as a toy.
•
For children safety reasons do not leave polyethylene bags
used as packaging unattended.
Attention!
Do not allow children to play with polyethylene bags
or packaging film.
Danger of suffocation!
•
Do not allow children to touch the unit and the power cord
during the unit operation.
•
The unit is not intended to be used by people with physi-
cal, sensory or mental disabilities (including children) or
by persons lacking experience or knowledge if they are not
under supervision of a person who is responsible for their
safety or if they are not instructed by this person on the
usage of the unit.
•
Do not use the fan if the blades, the power cord or the
power plug are damaged, if the fan works improperly, after
it was dropped or was damaged in some other way.
•
If the power cord is damaged, it should be replaced by the
manufacturer, a maintenance service or similar qualified
personnel to avoid danger.
•
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it has
fallen, unplug the unit and apply to any authorized service
center at the contact addresses given in the warranty cer-
tificate and on the website www.coolfort.ru.
•
Transport the unit in the original package.
•
Keep the unit in a dry cool place out of reach of children and
people with disabilities.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS
AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After the unit transportation or storage at low tempera-
ture keep it for at least three hours at room temperature
before switching on.
FAN ASSEMBLING
The fan is supplied disassembled. Do not connect the unit to
the mains, if it is not completely assembled.
•
Unpack the unit and remove any stickers that can prevent
its operation.
•
Check the unit for damages; do not use it in case of dam-
ages.
•
Assemble the floor support (4) according to the pictures
1-6: match the locks (9) and the clamps (6) on both halves
of the stand (4) (pic. 4 and 5) and put them together until
clicking. Pass the power cord through the installation open-
ing of the stand (8).
•
Install the bottom part of the fan body into the assembled
stand (4) and fix it with the clamping nut (10).
•
Fix the power cord (5) in the power cord duct (11).
USAGE
Before using the unit for the first time, make sure that the volt-
age in your mains corresponds to the unit operating voltage.
•
Insert the power plug into the mains socket.
•
Press the on/off button (15), you will hear a sound signal
and the unit will be switched on.
•
Select the airflow speed pressing the «Speed» button (16)
alternately on the control panel (1) or the button (16) on
the remote control (18); the indicators on the display (12)
