COOLFORT CF-2004, Инструкция по эксплуатации

Страница: 4 / 8

4
ENGLISH
FAN CF-2004
The fan is intended for artificial ventilation of rooms.
DESCRIPTION
1. Front grid
2. Blades
3. Fastening nut
4. Rear grid
5. Blades spindle
6. Oscillation On/Off button
7. Upper part of the floor support
8. Bottom part of the floor support
9. Upper part of the floor base
10. Bottom part of the floor base
11. Motor unit
12. Fastening screws
13. Speed switch «0-1-2-3»
SAFETY MEASURES
Before using the electrical appliance read this manual
carefully and keep it for further reference.
Use the unit for its intended purpose only as specified
in this manual. Mishandling the unit can lead to its
breakage and cause harm to the user or damage to
his/her property.
· Before switching the unit on for the first time make
sure that your home mains voltage corresponds to
the unit operating voltage.
· Before using the unit examine the power cord
closely and make sure that it is not damaged. If
you find that the power cord is damaged, do not
use the unit.
· Do not use the fan outdoors.
· Place the unit on a flat, dry and steady surface
away from sources of heat or open flame.
· Do not use the unit near containers filled with
water, next to a kitchen sink, in wet basements or
near a swimming pool.
· Do not immerse the fan, power cord and power
plug into water or any other liquids.
· Do not touch the unit body and the power plug with
wet hands.
· If the fan falls into water, unplug it before touching
it and only then you may take the fan out of water.
Apply to the nearest authorized service center
for testing or repairing the unit at the contact
addresses given in the warranty certificate and on
the website www.coolfort.ru.
· Make sure that the power cord does not contact
with hot surfaces and sharp furniture edges.
· Do not switch the unassembled fan on.
· Do not insert any foreign objects into the openings
of the fan protective grids to avoid injuries or unit
damage.
· Do not touch the rotating blades during the fan
operation.
· Do not place the fan near curtains or house plants.
· It is not recommended to stay under the air flow
coming from the fan for a long time (especially for
children and elderly people).
· Never leave the operating unit unattended.
· Unplug the fan before cleaning and when you do
not use the unit or before moving it to a new place.
· When unplugging the fan pull the plug but not the
cord.
· Clean the unit regularly.
· Do not allow children to touch the unit and the
power cord during the unit operation.
· The unit is not intended to be used by persons
(including children) with any physical, sensory
or mental disabilities or by persons lacking life
experience or knowledge if they are not under
supervision of a person responsible for their safety
or if they are not instructed by this person on the
usage of the unit.
· Do not leave children unattended to avoid them
using the unit as a toy.
· For children safety reasons do not leave polyethyl-
ene bags, used as packaging, unattended.
Attention! Do not let children play with polyethylene
bags or packaging film. Danger of suffocation!
· Do not use the fan if the blades, power cord or
power plug are damaged, if the fan works improp-
erly, after it was dropped or was damaged in some
other way.
· If the power cord is damaged, it should be replaced
by the manufacturer, service or similar qualified
personnel to avoid danger.
· Do not repair the unit by yourself. Do not disas-
semble the unit by yourself, if any malfunction is
detected or after it has fallen, unplug the unit and
apply to any authorized service center at the con-
tact addresses given in the warranty certificate and
on the website www.coolfort.ru.
· Transport the unit in the original package.
· Keep the unit in a dry cool place unreachable for
children and people with disabilities.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY. ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low tem-
perature keep it for at least three hours at room
temperature before switching on.
ASSEMBLY
· Unpack the unit and remove any stickers that can
prevent its operation.
· Check the unit for damages, do not use it in case
of damages.
· Do not switch the fan on until it is completely
assembled.
· Assemble the floor base with the upper (9) and
bottom (10) parts. Fix the bottom part with the
screws (12). Place the base on a flat, dry and
steady surface.
· Assemble the floor support with two parts: upper
(7) and bottom (8). Screw the upper (7) part of the
floor support in the bottom part (8).
· Insert the support into the base. Make sure
that the fixing latches on the support match the
openings on the base and connect them until
clicking.
· Set the rear grid (4) on the motor unit (11) and fix
it with the nut (3).
· Install the blades (2) on the motor (5) axis match-
ing the blades groove with the lock on the motor