Cooler Master RS-550-ACLY, Руководство пользователя

Страница: 5 / 20

4
User’s Manual / English
3. Installation
1. Switch off the main switch of the power supply and disconnect the power cord.
2. Unscrew and open the side panel of the chassis.
3. Disconnect all power connectors from the motherboard and from peripheral devices such as
case fans, hard drives, CD-ROMs, floppy drives, etc.
4. Replace the power supply.
5. Connect P1 (24-Pin) and P2 (+12V 8-Pin) or P3 (+12V 4-Pin) connectors to your motherboard.
6. Connect other connectors to your system components.
7. Connect the cable between the Display Interface Connector and the Human Computer
Interface.
8. Slide and screw the 3.5” Human Computer Interface into the chassis.
9. Make sure that all other connectors are also connected.
10. Close the chassis and reattach the case screws.
11. Plug in the power cord and switch on the main switch of the power supply.