STEP 1
Take all parts out of the box
and ensure they are all present.
a) Common pole x 14
b) Centre pole x 3
c) Lower leg pole x 4
d) Right plastic moulded corner x 2
e) Centre plastic moulded corner x 2
f) Left plastic moulded corner x 2
g) Metal peg x 4
h) Fabric cover x 1
STEP 4
Connect the remaining four
common poles (a) to lower leg
poles (c) and connect to
completed roof frame
as shown in diagram.
STEP 6
The height of the back of the canopy can be
adjusted by removing the lower leg poles at
the back. Secure the cover to the bottom
of the upper leg poles with hooks and use
metal pegs to secure to the ground.
3.35m/11'
2.06m/6'9"
3.65m/12'
CABANA
A S S E M B L Y G U I D E
a
d
g
b
e
c
f
STEP 2
Connect four common poles (a) to plastic
moulded corners (d), (e) and (f) as shown
in diagram to form gazebo roof ends.
STEP 5
Place the fabric cover (h) over the gazebo
frame and secure with metal hooks into
desired hole at the bottom of pole (c).
Then use the metal pegs to secure each
corner of the cover to the ground.
a
c
d
d
d
d
a
a
a
a
a
c
c
c
c
a
e
e
a
a
STEP 3
Connect six common poles (a) to centre poles (b) and
use to connect gazebo roof ends as shown in diagram.
b
b
b
a
a
a
a
a
a
a
a
a
a
f
f
f
f
h
Ensure gazebo is closed when not in use. Dismantle before strong storms approach.
Never allow to flap in the wind; this could damage the canopy.
