Cool music M2, Руководство пользователя

Страница: 3 / 14

--
QUICK SET-UP GUIDE
1. Connect the line cord to the appropriately rated receptacle.
2. Be certain that all levels are down or set to the fully counter-clockwise position and set all the EQs flat
3. Set the master level to the 12:00 position
4. Connect output of your music instrument to the input of the M2/M3
5. Set the main/monitor switch to the monitor position
6. Turn on power to the M2/M3
7. Adjust the channel level for proper volume
8. Adjust the channel EQ as needed.
Front panel controls
Level (1)
Controls the 1/4" jack input level. (Channels 1‚ 2 and 3 on the M3 and channels 1 and 2 on the M2 .)
Low EQ (2)
An active tone control (shelving type: +/-15dB) that varies the low frequency range. ( M3 :channels 1‚ 2 & 3; M2 :
channels 1 & 2.)
Caution: Excessive low frequency boost causes greater power consumption and increases the possibility of
speaker damage.
Hi EQ (3)
An active tone control (shelving type: +/-15dB) that varies the hi frequency range. (M3:channels 1‚ 2 & 3; M2:
channels 1 & 2.)
EFX(4)
knobThis knob selects the effect type and adjusts its depth for the channel.
Mid EQ (5)
An active tone control (peak/notch type: +/-15dB) that varies the mid frequencies. (Channel 3 on the
M3
and channel
2 on the M2 .)
CH4/Monitor Level (6)
Controls the input level for channel 4. Controls high-impedance microphones or other high-level sources equipped with
a 1/4" phone plug.
Headphone Level (7)
This sets the level to the headphone jack on the rear panel. To avoid damage to your hearing‚ make sure to turn the dial
fully counter-clockwise before using headphones. Slowly turn the knob clockwise until a comfortable listening level is
set. This does not affect the master level.
1 1 2 2 3 3 4 4 4 1 2 3 5 9 10 8 6 7 11 12 13