www.cool-icam.com
© 2001 TCG.
UK Version 1 0301
Page 32
11.11 How to use Cu-SeeMe™
Connect your
Cool-iCam Plus
to the USB cable on one end.
Connect your USB cable to an available USB port on your Mac on the other
end.
Put your
Cool-iCam Plus
on top of your Mac monitor or another flat surface.
Connect your microphone (not included) to your audio card's external
microphone connector.
Double click the “Cu-SeeMe™” icon from the Cu-SeeMe™ folder.
Go to "Edit" and then "Preference". Edit your settings, e.g. video title,
connection settings, etc.
Go to "Conference" and click "Connect". Type in the Hostname and IP
address for the person you want to call and press "Connect".
To find your own IP address, go to "Control Panel" and then "File Sharing".
You will be able to see your IP address under the "Start/Stop" partition.
For further help on how to use Cu-SeeMe™, you can visit the following
website: http://www.cuseeme.com
1.
2.
3.
4.
5.
6.
7.
8.
9.
Warning! Using Cu-SeeMe™ will erase all images stored in your
Cool-iCam Plus
. Make sure you upload all
wanted images before using Cu-SeeMe™.
11.12 How to use Adobe® Acrobat® Reader
Adobe® Acrobat® Reader enable you to view the full user's manual
in PDF format in the
Cool-iCam Plus
CD-Rom.
Find the user manual.pdf file on your
Cool-iCam Plus
CD-Rom.
Double click the file. Adobe® Acrobat® Reader will be launched
automatically.
If you want to review the full User's Manual without the CD-ROM.
Copy the user manual.pdf file by dragging the "user manual.pdf' file
from CD-Rom into your Hard Disk.
You can now review the full User's Manual from your computer even
without the
Cool-iCam Plus
CD-ROM.
1.
2.
3.
4.
MAC
