Cool Air MK-TF0003 Скачать руководство пользователя страница 8

~8~

WARNING:

   This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be 

                       swallowedby children. Ingestion of such batteries has been known to cause death.

WARNING:

   Keep batteries out of reach of children

WARNING: 

  Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and 

                       potential perforation of the esophagus.

WARNING:  

 If you suspect your child has swallowed or inserted a button battery, immediately seek urgent 

                       medical assistance.

WARNING:   

Examine devices and make sure the battery compartment is correctly secured, e.g. that the 

                       screw or other mechanical fastener is tightened. Do not use if compartment is not secure.

WARNING:   

Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.

WARNING:   

Tell others about the risk associated with button batteries and how to keep their children safe.

WARNING:   

This is a lithium battery which if swallowed has been known to cause death.

   TROUBLESHOOTING

The fan is not operating

The plug is not fully inserted into the 

wall outlet

Make sure that the plug is fully inserted 

into the base AC wall outlet.

The wall outlet experienced and 

overload. 

Unplug the fan. Inspect the main 

electrical breaker box. If you find a 

tripped breaker, reset it. If the problem 

persists, contact a qualified, licensed 

electrician.

Fuse in plug fails.

Remove and inspect the fuse located in 

the plug. If the fuse is tripped, replace 

with the appropriate 2.5 amp, 125V 

fuse. If the problem persists, contact a 

qualified, licensed electrician.

The fan is defective.

Contact customer service at 

[email protected] or call 

1-188-849-4079 for assistance.

The remote control does 

not operate the fan

Make sure remote is pointed toward front infrared window of fan.

Inspect the battery to ensure it is 

correctly installed.

Replace the battery. For best 

performance we recommend using a 

CR2032 battery.

 If the problem persists, contact 

customer service at 

[email protected] or call 

1-188-849-4079 for assistance. 

The battery is expired.

The fan(s) are missing parts.

Omitted parts are extremely rare due 

to stringent quality control during 

assembly, however there is a 

possibility that parts can be omitted.

Contact customer service at 

[email protected] or call 

1-188-849-4079 for assistance.

Problem

Possible Cause

Solution

Содержание MK-TF0003
























Отзывы: