USING THE CoolBox TIMER
WHAT THE TIMER FUNCTION DOES:
1.
Starts your Cool-A-Zone CoolBox cooler automatically after n hours from the stand-by state; OR,
2.
Stops your Cool-A-Zone CoolBox cooler automatically after n hours from being turned ON.
NOTE: THE TIMER FUNCTION CAN ONLY BE SET BY THE HOUR.
USING THE TIMER:
1.
Press the TIMER button.
2.
You will notice that the TIMER button
begins to flicker and you will see that “H x”
appears in the TEMPERATURE display.
3.
To increase the number of hours, hit the
SPEED button on the panel
or
Increase
Airflow button on the remotre control.
4.
You
cannot
set the timer for more
than
9 hours
.
5.
Once the desired hours are set,
do
not press any other buttons
, after
5 seconds the TIMER will activate.
7
8
EVAPORATIVE AIR COOLER
COOLBOX CONTROLS
(cont.)
USING YOUR COOLBOX
7. Timer Button
: Activates the CoolBox TIMER feature, allowing you to either start the unit
from a start-up set after a certain number of hours or stop the unit after a certain
number of hours. More on this function on Page 9.
8. Anion Button
: Turns the ANION function ON or OFF, as indicated by the Anion Indicator.
9. Remote Receiver LCD
: Indicates a command received from the remote control.
12. Low Water Indicator
: This warning light will let you know when it is time to refill your
CoolBox, and if the water gets too low, a buzzer will sound and the COOL mode will stop.
No buzzer will come on if you are in VENTILATION mode.
13. Show Ventilation Indicator
: Indicates the level of ventilation being used by the
CoolBox.
14. Timer Indicator
: When lit, indicates the TIMER function is active.
15. Swing Indicator
: When lit, indicates the CoolBox SWING function is active.
ROUTINE MAINTENANCE
THE FOLLOWING ARE BEST PRACTICES FOR MAINTAINING YOUR COOLBOX:
1.
Shell Cleaning: We recommend soap and water or a mild cleaner with a soft cloth.
Avoid abrasive cleaners or alcohol-based chemical cleaning agents.
2.
Pad Cleaning: it is recommended you remove the pad and clean using a soft brush once every
two weeks (more frequent if being in used in a dust-heavy environment).
3.
Draining the Tank: We generally advise you drain water at the end of every day’s use to increase
longevity.
4.
Tank Cleaning: we recommend that the tank be cleaned by hand on a schedule that suits your
needs best, especially in more humid climates or dust-heavy environments.
5.
Storing the CoolBox: if you have been using your CoolBox and need to store it, please ensure
that you have cleaned and dried your tank, cleaned the drain outlet, cleaned the pad and shell,
and store covered until needed again.
Ensure that when doing any cleaning or maintenance, that your
Cool-A-Zone CoolBox unit is powered OFF and UNPLUGGED!
DISABLING THE TIMER:
1.
Press the TIMER button.
2.
Set the number of hours to “0”;
3.
If you wish, you can also hit the POWER
button while the TIMER button is flickering.
4.
Alternatively, you can hit the POWER
button after the TIMER has activated,
and then hit the POWER button again.
When in Stand-By mode, the TIMER
function will count down to power ON
the CoolBox. If the CoolBox is already on,
the TIMER function will count down to turn
OFF your CoolBox unit.
SHOW
VENTILATION
TEMPERATURE
DISPLAY
SWING
INDICATOR
TIMER
INDICATOR
LOW WATER
INDICATOR
SWING
ON/OFF
REMOTE
RECEIVER
TIMER
ANION
ON/OFF
7
8
9
11
13
10
12
14
15
CZ-C100 Manual-rev.indd 5
8/1/12 10:48 AM
