Issue 2 28/09/2021
7
USING THE WHISK (CONTINUED)
4.
Connect to the mains, select the operation speed of choice
and when using the whisk, mix for a maximum of 1 minute.
If further whisking is required, wait 1 minute before
restarting.
5.
After a total of 3 of the above cycles, the whisk should be
rested for 20 minutes.
6.
Whisk to the desired consistency
–
see step 7 onwards under
‘basic operation’.
Note
•
To avoid splashing, ensure head of the whisk is within the
whisking bowl before starting or removing.
•
Do not add extra ingredients into the beaker / blending
container when the whisk is operating.
•
If whisking low viscosity / water like liquids it is advisable not
to fill the beaker to the maximum level as some liquid could
be ejected when the whisk is in operation.
USING THE CHOPPER
1.
Carefully remove the plastic blade guard and place the blade
onto the metal pin in the base of the chopping bowl (fig.4).
2.
Place the food to be chopped or blended into the bowl on top
of the blades, do not exceed the max level (600ml) marked
on the bowl.
3.
Fit the lid onto the motor housing and lock into position
(fig.5).
4.
Fit the lid onto the bowl (fig.6). Do not try to use the chopper
without the lid in place.
5.
Connect to the mains, select the operation speed of choice
and when using the mini chopper, chop for a maximum of 1
minute. If further blending is required, wait 1 minute before
restarting.
6.
After a total of 3 of the above cycles, the chopper should be
rested for 20 minutes.
USING THE CHOPPER (CONTINUED)
Содержание HB951H6
Страница 12: ...Issue 2 28 09 2021 12 ...