Cookworks HB951H2, Инструкция по уходу и эксплуатации, Страница: 4 / 8

ISSUE-1 24/7/2017 4
To use
1. Clean the hand blender thoroughly before first use.
2. Fit the stem onto the motor housing. Position the stem as shown
in parts diagram, align the black arrow on the collar with the
‘unlocked’ padlock symbol on the motor housing and fit together.
Turn the motor housing clockwise to lock into position. The
arrow will now be aligned with the ‘locked’ padlock symbol.
3. Place the ingredients to be blended into the beaker or another a
suitable deep sided container and place the container onto a
stable surface.
4. Fully unwind the hand blender cable and plug in.
5. Place the head of the blender below the surface of the
ingredients. Do not immerse the stem beyond the max level
shown in the diagram above.
6. Move the indentation on the speed selector fully to the right hand
side, switch on and hold down the blender ON/OFF button.
Blend for a maximum of 1 minute. If further blending is
required, wait 1 minute before restarting the blender.
7. After a total of 5 x 1 minute cycles, the blender should be rested
for 30 minutes.
8. The speed of the blender can be increased by moving the speed
slider towards the left hand side.
9. To switch off, release the ON/OFF button and allow the blade to
come to a complete stop before checking the consistency of the
mix. If satisfactory, remove the blender.
10. To stop or interrupt the blending process, release the button or
turn off at the mains.
Notes:

Do not run the blender dry (without the head covered by liquid).

To avoid splashing, ensure head of the blender is within the
blending container and the head is covered before starting or
removing.
 If using to puree fruit and vegetables, remove the skins, peel or
stones and cut into small pieces before blending.

If blending ingredients in a saucepan (e.g. to purée soups),
remove the saucepan from the heat to protect the blender from
damage.