Issue 3 28/09/2021
4
PARTS
TO USE
1.
Place the coffee maker on a stable, flat, heat resistant
surface and away from surfaces that may be damaged by
steam.
2.
Fully unwind the cable and plug in. For safety do not allow
the cable to dangle over the edge of units.
3.
Lift the lid of the coffee maker and fit the filter holder as
shown. Insert the mesh filter into the filter holder and add
fresh ground coffee for the required number of cups into the
mesh filter according to personal taste.w Alternatively, a
traditional paper filter (not included) can be used instead of
the mesh filter.
4.
Fill the water reservoir to the required level using the
graduated markings on the clear panel as a guide. Do not fill
past the maximum 10 cups (otherwise water will flow out of
the back of the reservoir and onto the work surface) or fill
below the minimum (2 cups) levels.
5.
Close the lid and place the glass jug onto the hotplate.
On / Off
switch
Jug lid
Jug
Lid
Mesh filter
Water
reservoir
Hotplate
Water
gauge
Filter holder
