CookTek MC1800G, Инструкция по установке и эксплуатации

Страница: 14 / 20

12
Symptom Cause of Error Displayed Message
No power (no
lights or fan
noise.)
• Unit unplugged.
• No power to receptacle.
• Plug unit into appropriate receptacle
• Make sure that receptacle is energized.
• Check wall switches.
• Check circuit breaker.
• Plug a different electronic device into the
receptacle to make sure that power is
present.
Pan does not
heat.
• Pan is not induction
efficient.
• Pan diameter is less than
7 inches.
• Pan not centered
over cooktop logo not
centered.
• Use induction efficient pan.
• Use a larger induction efficient pan
• Center pan.
Cooktop suddenly
stops heating
• Possible power brown
out.
• Circuit shared with
another electrical device.
• Air vents blocked or
insufficient air circulation
• Safety shut-off engaged.
• Assure proper voltage/power levels.
• Make sure the cooktop is not
sharing a circuit with electrical devices.
• Check air vents to make sure that they
are not blocked. Make sure that there is
sufficient air flow around the appliance.
• The safety shut-off will engage if an
empty pan is left on the surface while
the unit is working at full power. Make
sure that the surface is clear. Wait 15-20
minutes for the unit to reset.
Pan does not get
hot enough even
though power
levels are set
to maximum –
induction efficient
pan in use
• Extension cord in use.
• Circuit shared with
another electrical device.
• DO NOT use extension cords. Extension
cords may affect the power levels
reaching the appliance.
• Make sure that the unit is not sharing a
circuit with other electrical devices.
Pan heats
unevenly, does
not maintain heat
level, or
overheats.
• Pan is not induction
efficient.
• Pan bottom may not be
flat enough.
• Pan not centered.
• Pan diameter is less than
7” (178 mm).
• Use induction efficient pan.
• Use flatter pan.
• Center pan.
• Use a larger induction efficient pan.
TROUBLEShOOTING