2
17
Przed rozpoczęciem używania:
Należy sprawdzić, czy przewód zasilania jest pewnie przymocowany do modułu
CookTek PRZED podłączeniem urządzenia do gniazdka zasilania i przed
rozpoczęciem jego używania.
• Nie dotykać płyty ceramicznej (lub wierzchniej części urządzenia Cooktop
bezpośrednio po zakończeniu jego używania. Wysoka temperatura patelni może
przenosić się na płytę ceramiczną, stwarzając możliwość oparzenia w przypadku
jej dotknięcia.
• Obsługa serwisowa tego produktu może być prowadzona jedynie przez
upoważnionego pracownika serwisu lub przez personel firmy CookTek. Nie
podejmować samodzielnej próby otwarcia urządzenia ani nie wykonywać
żadnych napraw. Aby uzyskać informacje dotyczące obsługi serwisowej, należy
skontaktować się z firmą CookTek pod n1 214-379-6000.
• Niniejsze urządzenie wymaga uziemienia. Podłączać jedynie do właściwie
uziemionego gniazda. Przed użyciem należy przeczytać instrukcję dotyczącą
uziemienia oraz część „Wymogi instalacji elektrycznej” na stronie 2 niniejszej ulotki.
Nie używać przedłużacza.
Antes de funcionar com o seu Cooktop, faça o seguinte:
•
Retire todo o material de embalagem.
•
Coloque a unidade numa superfície seca, nivelada, rígida, estável e não
inflamável.
•
Mantenha a unidade afastada de outras fontes de calor e deixe um espaço de pelo
menos 5 cm nos lados, frente e traseira da unidade, para circulação do ar.
Para sua segurança, nunca corte, retire nem desactive a ligação eléctrica (terra) da
ficha. Nunca utilize uma ficha adaptadora nem cabo de extensão com o Cooktop.
ADVERTÊNCIA: Uma ficha incorrectamente ligada à terra pode provocar
choque eléctrico. Se tiver alguma questão sobre estas instruções de ligação
à terra, por favor consulte um electricista qualificado.
Antes de Começar:
Por favor, certifique-se de que este cabo de energia está ligado firmemente à sua
unidade CookTek ANTES de ligar a unidade à tomada de energia e antes de tentar
funcionar com ela.
•
Não toque na placa de cerâmica (no cimo do Cooktop) imediatamente depois
da sua utilização. O calor emitido pelo tabuleiro será transferido para a placa de
cerâmica, fazendo com que esta fique quente ao toque.
•
A assistência técnica deste produto só pode ser realizada por um agente de
assistência técnica autorizado ou por pessoal da CookTek. Não tente abrir a
unidade nem efectuar assistência técnica de qualquer tipo. Para informações
referentes à assistência técnica, por favor entre em contacto com a CookTek pelo
te1 214-379-6000.
Before operating your induction dry well, do the following:
•
Remove all packing material and save for subsequent shipment or in case of
concealed shipping damage.
• Keep unit away from other heat sources and allow at least 2” (51 mm) between all
sides of the housing and any surface or obstacle, and 6” (152 mm) between the
bottom of the housing and any surface or obstacle. If either the air intake or exhaust
outlet is blocked, the internal temperature will rise, causing an error code to occur.
Grounding Instructions:
The dry well must be properly grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing a safe path for the electric
current. The dry well has a power cord with a 3-prong grounding plug, which must be
used in a compatible and properly grounded outlet. It is the owner’s responsibility to
replace any 2-prong wall outlet with a properly grounded 3-prong wall receptacle.
For your safety, never cut, remove, or disable the electrical (ground) connection from
the plug. Never use an adapter plug or an extension cord with the dry well.
WARNING: Electric shock can result from an improperly grounded plug. Please
consult a qualified electrician if you have any questions about these grounding
instructions.
Before you begin:
Please make sure that this power cord is firmly attached to your CookTek unit
BEFORE plugging the unit into the power receptacle and before attempting operation.
Every installation site has different electrical wiring. Because many different local
codes exist, it is the Owner and Installer’s responsibility to comply with those codes.
CookTek is not responsible for any consequential damages as a result of failure to
comply with installation requirements.
• Read all installation instructions carefully before starting installation.
• Remove dry well carefully from carton.
•
Remove all loose packaging and accessories and save for subsequent shipment or
in case of concealed shipping damage.
• It is the responsibility of the installer to comply with all federal, state and local
codes.
• Any installation not matching the specifications discussed in this manual
automatically voids the product’s warranty.
•
Insert the unit in the counter cutout and, if desired, caulk around the seam to seal.
•
Plug one end of the control cable into the unit and thread the cable through the
cutout for the control box.
•
Plug the other end of the control cable into the control box and mount the control
box with four screws in the desired location.
PORTUGUESE
PREPARING yOUR COOkTEk INDUCTION HOLDING WELL UNIT fOR USE
ELECTRICAL INSTALLATION REqUIREMENTS
MECHANICAL INSTALLATION