
12
NOTES & TIPS #1:
•
Please note that the Pressure Limiting Valve (3) will be loose when you are
not using the unit for cooking. It will rock slightly and will turn 360
°
manually. Once the pressure cooker is in operation and the pressure has built
up to its capacity, the Pressure Limiting Valve (3) will tighten, only allowing
itself to be turned to
“
Exhaust
”
. Once all the pressure has released, it will
become loose again.
NOTES & TIPS #2:
•
During the Pressure Building process, you may notice steam or pressure
escaping from the Pressure Limiting Valve (3). Carefully adjust the valve by
moving it gently or turning it side to side gently using tongs or similar utensil
until it seals properly.
•
If any steam is escaping around the lid, it means that the Rubber Seal Ring(11)
may not have completed a tight seal when the lid (1) was locked. Cancel the
cooking process, release pressure manually or naturally, remove the lid (1)
and check the Rubber Seal Ring (11). Reposition the lid (1) and ensure that it is
secure. Re-Start the cooking process.
•
Please note that steam escaping from the Valve (3) or around the lid (1) is
normal for the first 5 minutes or so of the cooking process. If it continues
beyond 10 minutes, please press the Cancel button and follow the
instructions to release all of the pressure before removing the lid (1) to check
the Valve (3) or the Rubber Seal Ring (11).
PREPARING YOUR PRESSURE COOKER
(CONT).
NOTES & TIPS #3:
**At any point during the selection process or the cooking process, you can press
the CANCEL button to cancel your selection or to cancel the cooking process.