Assembly Instructions…
Step 5 – Lower Hinge Bracket (part #10b)
Hardware: M5*12 small screws (part #17) – 2 pcs
flat washers (part #23) – 2 pcs
lock washers (part #22) – 2 pcs
flat nuts (part #24) – 2 pcs
Locate the Lower Hinge Bracket. Set aside two
(2) M5*12 small screws, two (2) flat washers,
two (2) lock washers and two (2) flat nuts. Place
the Lower Hinge Bracket on the Bowl as shown
here, and align the holes. Note the
‘Up’ marking
on the Lower Hinge Bracket. Through each hole,
insert a small screw from the outside of the
Lower Hinge Bracket through the Bowl. From
inside the Bowl, place a flat washer, then lock
washer on each screw and affix using the flat nuts.
Step 6 – Attach Upper Hinge Bracket (part #10a) to the Lid (part #1)
Hardware: M5 small wing nuts (part #20) – 2 pcs
M5*12 small screws (part #17) – 2 pcs
flat washers (part #23) – 2 pcs
lock washers (part #22) – 2 pcs
Locate the Lid and the Upper Hinge Bracket. Set aside two (2) M5*12 small screws, two (2) flat washers,
two (2) lock washers and the two (2) small wing nuts. Place the Upper Hinge Bracket on the Lid as
shown below (on the side opposite the Cook’s Essentials logo), and align the holes. Through each hole,
insert a small screw from the outside of the Upper Hinge Bracket through the Lid. From inside the Lid,
place a flat washer, then lock washer on each screw and affix using the small wing nuts.
8
