7
substance of the following warning.
Warning: Failure to install the screws
or fixing device in accordance with
these instructions may result in
electrical hazards
2.
Feature
1. The cooker hood uses high quality materials, and is made with a
streamlined design.
2. Equipped with a large power low noise electric motor and
centrifugal leaf, it produces strong suction, low noise, non stick grease
filter and easy to clean.
3. Special wind tunnel construction and oil collector design, free dirt
will be absorbed in a second.
3. Installation
1.
The cooker hood should be placed at a distance
of 65-75cm (26-30inch) from the cooking
surface for the best effect.
2.
Drill a hole in the cabinet, with hole wide 500*275(mm).Refer to Pic
1. Make sure the hole edge to the cupboard edge at least 35mm
distance.
