GB
If the controller appears on the display the words "PR1" - ENVIRONMENT PROBE ERROR -:
- Correct position of temperature probe
- Probe connection
- Failure Probe
- Room temperature
If everything is correct remove power for 15 seconds and then proceed with the lighting.
EQUIPMENT DO NOT HEAT:
Check that the switch is in position 1 and is illuminated.
Check that the thermostat has not been involved
Check the correct positioning of the dishes out of the locker room hot.
- The top grid of the heating device should never be blocked. ( GR 1 )
Check that the external ventilation grills is free.
Check that the probe cable is not interrupted.
Check that the doors are closed compartment (cabinet through)
CLEANING AND MAINTENANCE
IMPORTANT :
• Do not rinse equipment with water jets.
• Before any cleaning, unplug the power supply.
• Clean surfaces daily with water in stainless steel and common non-abrasive detergent, rinse well and
dry thoroughly.
• Do not use steel wool or products containing chlorine.
• Do not use sharp objects that can affect and damage the surfaces of steel or enamelled parts.
• Do not use harsh products to clean the floor beneath the equipment.
• Before a long idle period of the 'equipment off the main switch current installed upstream of the same.
Proceed to its thorough cleaning.
• Require at least twice a year, the intervention of a technician to check the equipment. It should in any
case to take out a maintenance contract.
DISHES AVAILABLE FOR PROPER OPERATION
- Verify that there are 7-10 cm of light between the bottom and middle shelf and between the shelf and the sub-
floor. This' to facilitate the circulation of heated air and allow the correct temperature distribution
ANOMALIES - ERRORS - Digital Thermostat
CONTROLS:
GRX 1
18 / 33
