the support stand to hold the cal-COLOR
400 upright, depress the ON button and
position yourself a reasonable distance away
from the cal-COLOR 400. This way, physical
shadows or clothing reflections do not
interfere and alter your measurements.
Maintenance
“Battery Replacement”
When the LCD displays the “LO BAT” sign
in the lower right hand corner, it indicates
that the battery output is too low and
should be replaced to prevent erroneous
readings. To ensure accurate measurements,
the cal-COLOR 400 should be re-calibrated
on a yearly basis. The re-calibration service
provided by The COOKE Corporation will
maintain the cal-COLOR 400’s calibration
traceability to NIST standards.
Cleaning
Use a damp cloth and mild detergent for
the painted surfaces. The optics should be
cleaned with lens paper, methanol, or
compressed air depending on the
contamination. DO NOT USE ACETONE OR
OIL BASED CLEANERS.
LASERS
INDUSTRIAL
IMAGING
LASERS
INDUSTRIAL
IMAGING
6930 Metroplex Drive,
Romulus, Michigan 48174
tel 248 276 8820 fax 248 276 8825
[email protected] www.cookecorp.com
LASERS
INDUSTRIAL
Operating
Instructions
Calibrated Precision Colormeter
Operating Instructions
