23
Note
Check that the door opens and shuts correctly, without fouling, after
you have completed the door reversal process.
After the door has been reversed, you should check the door seal of
the appliance. The seal should not be creased or crushed; otherwise
there will be a gap between it and the inside of the door.
•
The seal must adhere properly all the way around the door.
•
If the seal is not adhering to the cabinet properly, then you should either:
Use a warm damp cloth and manipulate the seal until it does adhere to the cabinet
properly, all the way around the door.
Note
Do not heat the door seal on anything but the lowest heat setting,
or heat the seal for a long period of time. Otherwise damage may
be caused to the door seal, which would not be rectified under the
guarantee free of charge.
When the appliance has been placed underneath the worktop, you may decide to
attach a plinth or kickboard to match your existing kitchen units.
Remove the grill on the base of the appliance by unscrewing the screws on each
side of the grill and then pull the grill towards you.
03
Adjusting the plinth/kickboard
BFU60CL-C&L-A5-GB-IM-11.indd 23
10/15/13 4:13 PM
