5
Installation
[09] x 2
Ø4 x 16 mm
[10] x 8
[11] x 2
[11]
Installation of Built-under ovens
• For correct installation under the work surface, first attach two 18 mm clad-on end panels to the adjacent surfaces of
the cabinets - step 01a.
• IMPORTANT: Do not mount the brackets [09] directly to the cabinet end panels as the oven doors will interfere with any
drawers mounted in the cabinets!
• Mark the end panels as shown and attach the brackets [09] using screws [10] to the panels - step 01b.
• Alternatively, use a tall oven housing unit and remove the back panel to ensure an adequate current of air circulates
around the appliance. In this case, brackets [09] and screws [10] may not be required for the installation.
• CAUTION! The panels of the adjacent cabinets must be made of heat-resistant material. In particular, the adhesive
that bonds the plastic laminate to the furniture must be able to withstand temperatures of not less than 120°C to avoid
delamination. The appliance must be housed in heat-resistant cabinets.
• Be sure to observe the minimum installation height of the kitchen unit. Pay attention to the minimum dimensions of the
openings.
01a
5059340094113-C&L-A4-IM-Easy-V10.indd 5
5059340094113-C&L-A4-IM-Easy-V10.indd 5
29/10/2020 3:20 PM
29/10/2020 3:20 PM
