4
Safety
Installation
All installation must be carried out by a competent
person or qualified electrician. Before connecting
the mains supply ensure that the mains voltage
corresponds to the voltage on the rating plate.
Direct Connection
• The appliance must be connected directly to
the mains using an omnipolar circuit breaker
with a minimum opening of 3 mm between the
contacts.
• The installer must ensure that the correct
electrical connection has been made and that it
complies with the wiring diagram.
• The cable must not be bent or compressed.
• Regularly check the power cord for damage. If
the supply cord becomes damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
WARNING:
This is a Class I appliance and
MUST be earthed.
• The appliance is supplied with a 3-core mains
cable and must be connected to the electricity
supply via a double pole switch having a 3 mm
minimum contact gap on each connector.
• This appliance requires a 25 Amp Miniature
Circuit Breaker (MCB).
The wires in the mains lead are coloured in
accordance with the following code:
Brown = L - Live
Blue = N - Neutral
Green and Yellow = -Earth
FUSE ON
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
UK
USE A 25 AMP FUSE
To avoid the risks that are always present when
you use an electrical appliance it is important that
this appliance is installed correctly and that you
read the safety instructions carefully to avoid
misuse and hazards. Please keep this instruction
booklet for future reference and pass it on to any
future owners. After unpacking the appliance
please check that it is not damaged. If in doubt,
do not use the appliance but contact Customer
Services -see end of Care & Maintenance section
for details.
201693_s1_s2-5059340094090-C&L-A4-IM-Safty-V02.indd 4
201693_s1_s2-5059340094090-C&L-A4-IM-Safty-V02.indd 4
13/2/2020 6:02 PM
13/2/2020 6:02 PM
