Steljes Audio .
ConXeasy SB603
User Guide
7
If you encounter problems when using the SB603 Flat Panel Display Soundbar, check the
following points before requesting a service.
In order to keep the warranty valid, please DO NOT attempt to repair the system yourself.
Note: due to EEC regulations this product will switch to standby mode as follows
The SB603 switches to standby mode in the following situation:
The device is idle for 30mins when powered by AC supply;
The L/R Audio in or 3.5mm jack is disconnected or when there is no input signal or the
input signal is too low.
If using the 3.5mm jack input to SB603, we recommend to default the output volume at
75% or above on the external devices to ensure that it does not automatically go into
standby mode.
1.
No power
- Make sure power cords are securely connected to the AC output.
- Make sure that there is power at the AC output.
- Press the power button on the remote control or the front of the SB603 .
2. No audio
- Press the (Up) button on the remote control or the front of the SB603.
- Make sure that you selected correct input (Input 1, Input 2, or Input 3).
- Press MUTE on the remote to make sure the SB603 Flat Panel Display Soundbar is
not muted.
- Make sure audio cables are securely connected at the terminals of the SB603 and
the external devices.
TrOublE ShOOTINg
ConXeasy SB603 Manual LT.indd 7
22/01/2016 14:53