3
1. Pull the neck
of the inside
11”
balloon
while pinching
the necks of
the 2 balloons
together.
2. Stretch the neck
of the inside 11”
balloon around
the neck of the
outside16” balloon.
3. Tie
off the
balloon.
1. Press-fit the Double Bubble Outlet
onto the inflating outlets of the Dual
Split-Second Sizer. Attach the yellow
hose to the right outlet and the blue
hose to the left outlet.
2. Set the Dual Split-Second Sizer to
MODE 3 on the control panel. Reference
the following chart to set the unit to properly
inflate the balloons.
1
2
Double Bubble Inflation Instructions
3. Place the 11" balloon over the
blue hose.
4. Place the 16" balloon over the 11"
balloon and the yellow hose. Hold firmly
to prevent helium from escaping during
the inflation process.
5. Tap the foot pedal to inflate
the balloons. After the balloons
are fully inflated, pinch the
neck of the balloons together
and remove the Double Bubble
outlet quickly to prevent helium
from escaping.
3
4
5
Tying Double Bubble Balloons
1
2
3
Outside Balloon: 16"
60 PSI
Right outlet, yellow hose,
Dual Sizer Setting: 3.7 Seconds
Inside Balloon: 11"
60 PSI
Left outlet, blue hose,
Dual Sizer Setting: 1.7 Seconds
Double Bubble Balloon Size Chart
Auto-Fill Foil Outlet Instructions
1. The Dual Split-Second Sizer includes a quick disconnect port
located on the back of the unit. The Auto-Fill Foil Outlet will easily
snap into place when pushed into the port.
2. Place the foil balloon over the inflating outlet. Pinch the neck of
the balloon between thumb and forefinger and press down on the
outlet. Support the foil balloon in an upright position to insure the
neck of the balloon does not fold over the outlet and restrict the
flow of helium. When the balloon has reached the proper pressure
the inflator will automatically shut off the helium flow.
Remove the balloon from the outlet and attach a ribbon and a balloon
weight.
2
1
