Convotherm OGB-20.10, Инструкция по установке и обслуживанию, Страница: 14 / 42

8
B. INSTALLATION OF THE COMBI – Overview and General Instructions
1. Select the Combi’s operating location.
2. Complete the drain, electric, and water lines before positioning and leveling the Combi.
3. Position and install the Combi.
4. Connect the utility lines after positioning and leveling the Combi.
5. After Setup and Checkout, the Combi should provide years of reliable operation.
CAUTION
Malfunctions and equipment damage will result from improper installation.
Malfunctions and/or damage resulting from improper installation are NOT covered by warranty.
Glass damage resulting from improper use or cleaning is NOT covered by warranty.
Damage from improper use or cleaning, repair, maintenance, descaling, and failure to use appropriate
cleaning products is
NOT covered by warranty.
Light bulbs, sealants, and consumable supplies in normal use are NOT covered by warranty
DANGER
DEATH, INJURY, AND EQUIPMENT DAMAGE will result from
improper lifting.
Use enough workers with training and experience lifting heavy
equipment to place the Combi on the supporting surface
WARNING
All clearance requirements above, below, and
around the Combi are the same for non-
combustible locations as for combustible locations.
A COMBI MUST BE LEVEL BOTH FRONT TO BACK AND
SIDE TO SIDE IN ALL INSTALLATIONS.
OPERATING A COMBI OUT OF LEVEL WILL CAUSE
CATASTROPHIC DAMAGE.
DANGER