Convotherm 4 Table-Top, Руководство по эксплуатации

Страница: 124 / 144

5.3.6 Removing and Installing the Hygienic Plug-In Gasket
For your safety when using the unit
Before starting work, read and understand the rules, risks, and hazards specified in 'Safely Using the
Unit' on page 113 and follow all the corresponding instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
■
Safely Opening and Closing the Unit Door 60
Prerequisites
■
The combi steamer must have cooled down to a temperature of less than 60 °C since the last time
it was used.
■
The unit door must be open.
Removing the hygienic plug-in gasket
1.
Pull out the hygienic plug-in gasket around the unit door
opening. Start from the corners.
Installing the hygienic plug-in gasket
1.
Start by putting the hygienic plug-in gasket back in place
at all four corners. Start from one of the upper corners.
2.
Once all four corners are in place, meticulously press the
hygienic plug-in gasket into the rest of the guide.
Make sure that the hygienic plug-in gasket is resting sol‐
idly against the guide and that there are no bends or
kinks in it.
5 How to Clean the Combi Steamer
Operating Manual 124