Convotherm 4 easyDial, Руководство по эксплуатации

Страница: 46 / 61

6.5 Semi-Automatic Oven Cleaning Workflow
Prerequisites
■
The unit door must be closed.
■
The semi-automatic oven cleaning profile must have been selected.
■
The cleaning profile must have been started.
Cleaning process
1
The user removes all food
Before the semi-automatic oven cleaning process
starts, all food needs to be removed from the oven
cavity. The C-Dial will light up with a solid green
light.
The unit prompts the user to open the unit door
An acoustic signal asking for the food to be re‐
moved from the unit will be emitted and the 'Open
unit door' prompt indicator will light up at the same
time.
2
Food taken out
While the user checks to make sure that all food
has been removed, the 'Close unit door' indicator
will light up. The C-Dial will light up with a solid yel‐
low light.
3
1st cleaning stage
Immediately after the unit door is closed, the clean‐
ing sequence’s 1st cleaning stage (soaking phase)
starts. The display will show the cleaning duration.
The C-Dial will light up with a solid yellow light.
4
The unit prompts the user to spray cleaning agent
inside
Once the 1st cleaning stage is complete, an acous‐
tic signal will be emitted and the 'Open unit door'
and 'Spray cleaning agent inside' indicators will
light up.
5
Spray cleaning agent inside
While cleaning agent is being sprayed inside, the
'close unit door' and 'spray cleaning agent inside'
prompt indicators light up. The C-Dial will light up
with a solid yellow light.
6 Cleaning with easyDial
46