Conviron GEN1000-GE, Руководство оператора

Страница: 32 / 54

GEN1000-GE Operator Manual
24 November 8 2019 | 291180-ENG R00
5.1 Fresh Air Inlet and Exhaust Ports
The fresh air inlet allows the operator to manually adjust the rate at which fresh air is introduced
into the chamber. The adjustment knob is located on the lower-left side of the chamber and can
be adjusted from fully closed (no fresh air) to fully open to allow up to 20 ft
3
/min (0.57m
3
/min) of
air exchange.
The fresh air inlet assembly contains a foam filter to help prevent dust and larger particulate
matter from entering the growth area. This filter should be cleaned monthly to prevent a build-up
of foreign material that could restrict airflow.
Fresh air is drawn into the bottom of the chamber through the inlet port by the chamber
’s
variable speed fan located in the ceiling compartment, and then the chamber air is exhausted
through the top exhaust port (Figure 5-3).
Figure 5-3 Fresh Air Inlet and Exhaust Port Location
5.2 Fan Speed Control
Fan speed is user adjustable between the preset minimum and the maximum allowable fan rpm.
To adjust the fan speed:
Refer to the supplied control system manual for a complete description and operating
instructions.
Inlet
Exhaust