5.4 Skip
Press “CH+ , CH-“ on remote control to choose adjusted
item. Then press “VOL+,VOL-“ button on unit or “V+ , V-“
on remote control to adjust what you need.
6. Clock
6.1 sleep
6.2 time
6.3 off-time
6.4 on-time
Press “CH+ , CH-“ on remote control to choose adjusted
item. Then press “VOL+,VOL-“ button on unit or “V+ , V-“
on remote control to adjust the time.( NOTE: Under non-
setting time situation , don't adjust the unit time on or off.)
5. Preset
5.1 Auto-search
5.2 search
5.3 Fine
6
.
Using remote control unit
1
2
3
4
5
5
6
6
7
8
1).power: switch ON/OFF power.
2).Mute: press this button, the sound disappear,
then press V+ or V-
to restore to normal.
3).TV/AV: Select channel(TV)AV output.
4).0-9,-/--:Select channel program. when the
channel number is one digit, press the
correspondent number. when the channel number
is two or three digit ,press-/-- key,which
the screen will show two
or three light bars, and
then enter into the correspondent numbers.
5)
.
V+/-:Press these two button to increase and reduce
volume, it is also used for adjusting and confirming menu.
6) CH+/-:Press these two buttons to increase or decrease
channel number, and also control the submenu up and
down when adjusting menu.
7) Menu: Press it to enter into or close from menu.
8) Mode : Standard, Brightness, Colorful, Softness, Choice
TV MODE
If you have choose the TV mode, and connected the TV signal,
then will show picture normally. If not connect to the TV or no
signal, then will be show “no signal”.
Press “ MENU “ button on unit or remote control to enter the
main menu, then to setting the picture ,sound , function ,
system ,preset and time.
1. Picture setting
1.1 Bright
1.2 Contrast
1.3 Color
Press the “AV/TV” button on unit ,or “CH+ , CH-“ on remote
control to choose adjusted item. Then press “VOL+,VOL-““
button on unit or “V+ , V-“ on remote control to adjust the
picture effect.
2. Audio setting
Volume
Press “vol+,vol-“ on unit or “v+ , v-“ on remote control to
adjust the volume.
3. Function setting
3.1
3.2 Zoom
3.3 Language
3.4
Press “CH+” “ CH-” on the unit or remote control to choose
the different function that you need to switch. Then Press
“VOL+,VOL-“ button on unit or “V+” “ V- ” to adjust that you
need.
Press “ch+ , ch-“ on remote control to choose adjusted
item. Then press “vol+,vol-“button on unit or “v+ , v-“ on
remote control to adjust the time.( note: under non-setting
time situation , don't adjust the unit time on or off.)
Input
4
．
System setting
4.1 S-roloc (auto, pal, ntsc) (secam as option )
4.2 S-sys (dk, i, m, bg ) (l as option)
Press “ch+ , ch-“ on remote control to choose adjusted item.
Then press “vol+,vol-“ button on unit or “v+ , v-“ on remote
control to switch pal,ntsc,secam system.
4
.
3
swap
4
.
4
copy
05
06
