1.
S-In-
This is the S-Video Input port. Using the appropriate connector cable,
connect the input port to your video device.
2.
V-In-
This is the Composite Video Input port. Using the appropriate connector
cable, connect the input port to your video device.
Computer System requirements
•
When previewing-
-
Pentium III 650MHz CPU or up
-
USB 2.0 Port.
-
Hard Drive speed 5400 rpm.
-
Graphic Card with 16MB memory or up.
-
Sound Card.
-
128MB main memory.
-
DirectX 8.1 or up.
-
Windows 98/ME/2000/XP.
•
When recording-
-
Pentium IV 1.5 GHz CPU or up.
-
USB 2.0 port.
-
Hard Drive Speed 7200 rpm.
-
Graphic Card with 32MB memory or up.
-
Sound Card 128MB main memory.
-
DirectX 8.1 or up
-
Windows 98/ME/2000/XP.
USB-201 Device Driver Installation
1. Power OFF the computer with no USB201 connection.
2. Power ON the computer.
3. Connect USB201 to computers USB2.0 port using a USB cable.
4. Once USB201 is connected to the computer, the system will automatically detect
the new hardware and dialogue box will appear. Select [Install from a list or
specific location (Advanced)] and click [Next] button.
5. After the dialogue box shows up, place the attached installation disc into the CD-
ROM. If setup window appears from installation disc’s setup software, close it.
Select
[Search for the best driver in these locations]
. Select
[Include this
location in the search]
. Click
[Browse]
button. Choose
[D:\Driver3063]
folder
and click
[Next]
Button.
6. When a new dialogue box shows up stating that the wizard is installing the
hardware then this indicates that the hardware installation is underway.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
