Operating Functions
and
Controls
Front Panel
①
HDMI Outputs 1:
Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI outputs play identical
video signal simultaneously.
②
HDMI Input:
Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
③
EDID Control switcher:
Default factory setting is TV, leave as it is when the
displays are working properly. Switch to STD to use built-in EDID, detail
capability in note.
④
SYS. Reset:
Default factory setting is "OFF". Switch to "ON" the system will
send the internal CEC to the display within 8~10 minutes, to force all the
displays switch to HDMI port 1. In the sane time, TV must Supports CEC
function in order to display accordingly. When switch to "OFF" the
system.
⑤
Sync LED:
The LED will illuminate when the HDMI source signal is
connected to the input port.
⑥
Power LED Indicator:
The LED will illuminate when the power is connected.
⑦
Power:
Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
Note:
1. When EDID is on TV:
Leave as it is if display is properly, unit will detect
the first HDMI output source's EDID and record in the unit. If the first
detected output source is DVI it will pass to next source, until the first
HDMI been detected. The detection priority is HDMI v1.3>HDMI v1.2 >DVI.
2. When EDID is on STD:
unit use built-in EDID
Video Supports -> 1080p 12 bit (max)
Audio Supports -> PCM2
3.
Your EDID selection will only activated when the unit is replug and
power on.
