Operation controls and functions
Front Panel
1. Power ON/OFF indicator-
This will illuminate when the power has been turned
on.
Rear Panel
1.
DC 7.5V-
This is where you connect your power supply.
2.
Vide output-
This is the video output port. An RCA connector is used for
composite video to connect the port to the output device.
3.
S-Video output-
This is the S-Video output port. An S-Video jack for Y/C output
is used to connect the port to the output device.
4.
Audio output pair (L + R)/2 sets-
Two sets of audio output ports.
5.
Scart RGB input-
This is the input port. Connect the input port to your scart
output device (sky satellite receiver or other video sources) using your input scart
connector.
Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
