Operation Controls and Functions
Front Panel
1. Input Select:
-
S-In-
This will illuminate when S-In is selected.
-
V-In-
This will illuminate when V-In is selected.
2. Input System
-
SECAM-
This will illuminate when the input system is SECAM.
-
PAL-
This will illuminate when the input system is PAL.
-
PAL M-
This will illuminate when the input system is PAL M.
-
PAL N-
This will illuminate when the input system is PAL N.
-
NTSC 4.43-
This will illuminate when the input system is NTSC 4.43.
-
NTSC 3.58-
This will illuminate when the input system is NTSC 3.58.
3. Output System
-
PAL-
This will illuminate when the output system is PAL.
-
NTSC-
This will illuminate when the output system is NTSC.
Rear Panel
1.
Output system select switch-
Set the switch to the type of signal you wish to
output. You may either choose to output NTSC or PAL.
2.
Video Output-
Connect your output device to the Video output port using a
composite RCA connector cable.
3.
S-Video Output-
Connect your output device to the S-Video output port using a 4-
pin mini Din connector cable.
4.
Input signals select switch-
Set the switch to select either Video-In or S-Video-In.
5.
Video Input-
Connect your input device to the Video input port using a composite
RCA connector cable.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv