Introduction
Video to DVI 1080p Scaler Box is an upgraded design to convert Standard Definition
Composite Video (CV) and S-Video (SV) signals to High Definition PC and HDTV
resolutions. Maximum output resolutions available are WUXGA and 1080p. With
support for NTSC and PAL video format input, an in-built frame rate conversion
feature from 50Hz to 60Hz ensures glitch-free viewing. The Video to DVI 1080p Scaler
Box has many enhanced features to maximize video performance and is ideal for use
in professional large screen presentations or private home theater applications.
The Video to DVI 1080p Scaler Box DVI output is DVI-I (Integrated). This means that
the output supports both Digital and Analog screens. The link can carry single or dual
link all digital video/data signals on 24 pins, or Analog video/data signals and ground
on 5 pins. This makes the Video to DVI 1080p Scaler Box ideal for use with any
digital/analog video system.
Features
1.
Motion adaptive 3D Y/C separation comb filter
( for composite video input )
2.
3D( frame Based ) motion adaptive YNR/CNR noise reduction
( for Y/C video input )
3.
Advanced 3D motion adaptive deinterlace
4.
Automatic 2
：
2/3
：
2 film mode detection
5.
Supports 50Hz to 60Hz frame rate conversion
6.
Video quality improvement
：
DCTI (Digital chroma transient improvement), DLTI (Digital luminance
transient improvement),
Black level extension.
7.
Average picture level ( APL ), Automatic contrast limiter ( ACL ) function
supported.
8.
OSD menu for picture quality adjustment.
9.
Built-in 8-bit DAC for RGB or YPbPr output.
10.
Front Panel and IR remote control.
11.
Automatic NTSC/PAL video format detection and switching.
Operation
Controls and
Functions
Front Panel
1. Power button and LED indicator:
Press the button once to power on the unit, Press again to power off.
when the unit is powered on, one of the input LEDs will illuminate
depending on your last selection of input source before power off.
The factory default setting for the input is CV (composite video).
