Operating Functions
and
Controls
Front Panel
The following sections describe the hardware components of the unit.
1.
IR sender.
2.
Colorbar: The color bar test pattern can test each key function.
3.
Output: Press to select output mode.
4.
TV system: Press to select video output system.
5.
▲ and ▼: Press to toggle through various control or setting values.
6.
Mode: Press the button continuously to toggle through the following selection:
Press "MODE" button to select each item.
Press ▲ and ▼ to select sub-item.
Output mode: Overlay, Video input, Mixer, PC input.
TV system: NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM.
Overlay mode: Blue key, Green Key, Red key, Black key.
PC Zoom: Off, Position to Position 9.
7.
Adjust: Press the button continuously to toggle through picture selection mode.
There are Contrast, Bright, Color, Hue, Detail, Flick, H size, V size, H Position, V
Position, Phase and Level. Each level is from 0 to 63 and the factory defaults value
is 31 excepted Contrast and Detail values. The Contrast factory default value is 58
and Detail factory default value is 10.
Press "ADJUST" button to select each items.
Press ▲ and ▼ to adjust each item levels.
[Note]: Above functions are only works for PC input.
8.
Power: Press to power on the system and press again
to turn
off.
9.
Power LED indicator: The LED will illuminate when power on.
10.
LCD display.
