2.
SELECT LED:
These LEDs will illuminate according to the selection.
Each selection with 2 LEDs of 3 colors, left LED is blue and right LED are
red or green. Each LED color represent a pattern/timing as below:
3.
SELECT Button:
Press this button to enter into selection mode and both LEDs will be
flashing in blue and green. Press again to enter into another selection.
4.
ENTER/PATTERN Button:
Press this button to enter into the selection then press the SELECT button
to select and the LED will illuminate in sequence from the default setting,
press ENTER again to confirm the selection. When exit selection mode
press this button to select pattern directly.
For example, to select HDCP 2.2 with blue scale and 4K2K60 timing
from the default setting, press SELECT (to enter into selection)→press
ENTER (to select HDCP) → press SELECT 2 times (to select
HDCP2.2/Blue LED) → press ENTER (to confirm HDCP selection) →
press SELECT again (to enter into PATTERN selection)→ press ENTER
(to select Patter) → press SELECT twice (to select Blue Scale/Blue
LED) → press ENTER (to confirm Pattern selection) → press SELECT
again(to enter into Timing selection) → press ENTER(to select Timing) →
press SELECT 5 times(to select 4K2k60/Blue LED)) → and press ENTER
(to confirm Timing selection).
Press ENTER together with EXIT to reset the setting back to default.
Note:
If the ENTER button is not pressed after the selection is made the setting
will not be established and will remain under the selection mode.
5.
EXIT/TIMING Button:
Press this button to exit/cancel the selection.
When exit selection mode press this button to select timing directly.
6.
HDMI OUT:
Connect with display/monitor with HDMI cable.
Содержание 15421
Страница 1: ...HDMI 6G Audio Bridge with Pattern Generator 15421 Operation Manual ...
Страница 6: ......
