Converters.TV 15376, Руководство по эксплуатации

Страница: 3 / 13

Operation Controls
and Functions
Front Panel
1. IR Window:
This IR Receiver receives the remote control signal from the packaged
included remote control only with IR frequency at 38kHz.
2. POWER & LED:
Press this button to turn ON the device or set the device to standby mode. The
LED will illuminate in green when switch to ON. This device contains power
last memory and therefore, when the power is connected the device will
switch to ON/Standby according to the last status.
*IP Reset:
Press this button together with INPUT button for 3 second under power ON
status, when the LED blink for once it means IP Reset complete.
3. SYNC:
This LED will illuminate when both input source and output display are
linked with active signal.
4. IN 1~4:
Press the INPUT button to select an input from the 4 input sources, LED will
illuminated according to the selection
Back Panel
1. HDMI IN:
Connect from source equipment such as Blu-ray/DVD/PS3 players, Set-Top-
Box or any HDMI equipped source device for input signal sending. The
device obtain auto detection function and will detect the last plug-in source
for display on output when it is unplugged, the device will detect rotationally
from 1~4 input source for display on output.