Converters.TV 15372, Руководство по эксплуатации

Страница: 3 / 7

Operation
Controls and Front Panel
Functions
1. POWER & LED: Press this button to turn ON the device or set the device to standby
mode. The LED will illuminate in green when switch to ON. This device contains power
last memory and therefore, when the power is connected the device will switch to
ON/Standby according to the last status.
2. IR Window: This IR Receiver receives the remote control signal from the packaged
included remote control only with IR frequency at 38kHz.
3. MENU: Press this button to enter into OSD menu.
4. ENTER: Press this button to select an OSD selection and press it again to confirm.
5. +/-: Press these buttons to move up/down in the OSD selection.
Rear Panel
1. HDMI OUT: Connect to HDMI TV/display or HD Amplifier for output
image and or audio display.
2 HDMI IN: Connect from source equipment such as Blu-ray/DVD/ PS3
players, Set-Top-Box or any HDMI equipped source device for input signal
sending.
3 IR OUT: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the equipment to be
controlled.
4 IR IN: Connect the supplied IR Receiver cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of the IR
Extender.